The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
Product Parameters
|
Material |
K9, fused quartz, ZF glass |
|
Specifications |
3*3*3,5*5*5,8*8*8,10*10*10,12.7*12.7*12.7,25.4*25.4*25.4(Unit: mm, the size of light can be Customized as needed) |
|
Dimension Tolerance |
士0.05mm |
|
Extinction Ra-tio |
Single wavelength> 2000:1, broadband> 1000:1 |
|
Surface Quality |
10-5 |
|
Beam Devia-tion |
3' |
|
Coating |
Narrowband: 780, 850, 980, 1030, 1064, 1310, 1550nm Broadband: 450-650, 650-900, 900-1200, 1200-1600nm High damage threshold: 15J/cm', 10ns, 10Hz, @1064nm |
Why Choose Us？
About HuaKe
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
The polarization beam splitter (PBS) is generally made of two right-angle prisms glued together or deepened with optical glue. The inclined surfaces are coated with a polarization beam splitting film, allowing P-polarized light to pass through while S-polarized light is reflected. All light beams incident on the exit surface are generally coated with an anti-reflection film.
7th FLOOR RUIXING BUILDING SUCUO ROADCHENDAI TOWN,JINJIANG CITY,FUJIAN PROVINCE,CHINA/ 10 FOREST ROW GREAT NECK NEW YORK 11023
이메일 : walk777@qzwalk.com
Skype : +8613338567988
WhatsApp : +86 -13338567988
한국인
English
Français
Deutsch
Italiano
Русский
español
日语
Türk
عربي
中文
IPv6 네트워크 지원
